Stonelight Body Style
We offer a wide choice of body styles in precast concrete.
Choose the body style first and be sure to use our handy reference chart to
help choose caps and light fixtures. Installation is recommended with poured
concrete footings approximately 8"-10" below ground level.
In areas where freezing temperatures are common,footings should extend below
the frost line. Stonelight does not provide footings.
NOTE: Concrete footings should be poured 4" thick all around bottom of
column of all Stonelights
The 6.5" x 38" or 44" concrete bollard
may be fitted with our 12 volt 27 or 30 watt fixture. Most cap styles
are offered.
See the reference guide for complete details.
The 8" x 44" Stonelight concrete bollard is our
most popular and versatile model. Most cap styles and light fixtures are available.
See the reference guide for complete details.
This concrete bollard emits light in four directions
with angled, polished, stainless steel reflectors mounted to the underside
of the cap. Only the MR-16 light fixture is available.
This style is available
as a security bollard.
See the reference guide for complete details.
The 12" x 48" concrete bollard is primarily
for commercial applications. You may chose from most cap styles.
Some building codes may require High Intensity Discharge light fixture.
This style is available
as a security bollard.
See the reference guide for complete details.
If
other concrete bollards seem a bit square, our 8" x 44 " round Stonelight may
be what you're after. We offer multiple cap styles and light fixtures
to choose from.
See the reference guide for complete details.
The
10" x 44" round concrete bollard is also a popular alternative to square
models. Many cap styles and light fixtures are offered.
See the reference guide for complete details.
E-Mail
info@stonelight.com
Stonelight
PO Box 413005. Naples, FL 34101-3005 USA
5805 Glencove Drive, Naples, FL 34108 USA
Tel: (239) 514-3272 Fax: (239) 594-7778
or Call Toll Free: (800) 982-2006